Important information resp. parameters for the welding process are included in the welding tables. The welding tables are based on indications from the pipe manufacturers and the DVS (German Welding Association). The welding tables contain information regarding pipe diameter, pipe wall thickness, aligning pressure, bead height, heat-up time, change over time, pressure ramp time, welding pressure and cooling time.
hdpe pipe welding procedure pdf download
HDPE pipe can be joined by butt welding, electrofusion welding, socket welding, or extrusion welding. These joints heat the pipe during the joining process, creating a completely homogeneous joint so the weld becomes as strong, or stronger than the existing pipe on either side of the weld. There is no need to use rubber seals or jointing chemicals, as is used for joining PVC pipe, which cause environmental health issues and increase the chance of failure over time. PE is less likely to have problems with root intrusion, and provides integrity for the pipeline, even when installed in unstable soils.
Due to the fusion welding system, the need for anchors or thrust restraint blocks are eliminated, as the joints become fully end load resistant, reducing costs for material and installation time. This also allows for safer excavation close to the pipeline in future, which is particularly important for high pressure gas pipelines. Coils of PE Pipe make trench-less installation safer and less intrusive on the surrounding environment. 2ff7e9595c
Comments